Explore this course:
Applications for 2024 entry are now open. Apply now or register your interest to hear about postgraduate study and events at the University of Sheffield.
Wireless Communication Systems
Department of Electronic and Electrical Engineering,
Faculty of Engineering
Course description
Study the key design aspects of a modern wireless communication system, in particular cellular mobile radio systems. There is a current shortage of communications engineers with a comprehensive appreciation of wireless system design from RF through baseband to packet protocols.
Accreditation
Modules
Opportunities exist for dissertation studies to be carried out in collaboration with other university research centres or with industrial organisations. Examples of previous projects include:
- Hand gesture-based computer user interface using Kinect.
- Wireless signal propagation in jet engines.
- Optically controlled smart antenna.
- MIMO antenna on mobile phone.
- Wi-Fi mesh network for LTE/LTE-advanced small cell backhaul.
Core modules:
- MSc Investigative Research Project
-
The aim of this module is to provide a structured individual project to enable you to carry out practical and/or theoretical work that underpins your academic studies and allows for the acquisition and demonstration of a wide range of research skills.
60 credits - Advanced Signal Processing
-
This module focuses on introducing advanced signal processing methods and technologies and their applications. Topics include multi-rate filtering and filter banks; signal transforms; random signals; adaptive filtering and array signal processing.
15 credits - Principles of Communications
-
This course considers the mathematical foundations and the derived theories and techniques used by a wide range of communication systems, particularly the more recent digital systems. The aim is to provide the very mathematical foundation for understanding modern communication systems, present the structure of modern communication systems and the basic issues at each stage in the system, and create a theoretical background that applies to all communication systems and is not affected by any particular technology.
15 credits - Antennas, Propagation and Satellite Systems
-
Review and application of electromagnetic theory for antenna analysis. Radiation pattern, gain, input impedance. Half wave, full wave dipole antennas, monopole antennas. Image theory. Antenna arrays. Polarization: linear, elliptical, axial ratio. Aperture theory: Fourier analysis, Huygens-Kirchhoff formula, rectangular and circular aperture, effective aperture. Microstrip antennas. Propagation in a plasma: critical frequency, refractive index. Ionospheric/tropospheric propagation of HF/VHF radio waves: MUF, ionosonde. Satellite communications systems. Earth stations - types and performance. Satellite transponders - amplifiers, redundancy, transmitters, frequency translation. Multiple access systems.
15 credits - Mobile Networks and Physical Layer Protocols
-
This module aims to provide an overview of how mobile communications networks operate and descriptions of the radio technology used over the air interface and the physical layer protocols used in GSM, 3G, 4G and 5G mobile networks. More specifically, the syllabus will cover: the description and demonstration of current UK cellular mobile networks with a historical perspective; antenna design for the radio-frequency interface, including handset, vehicle and base station antennas; multiple antenna arrays; health related issues of mobile handsets; radio propagation issues, diversity gain, Rake reception; link budgets; cellular network design and deployment strategies; modulation schemes; and GSM/3G/4G/5G physical layer protocols.
15 credits - Broadband Wireless Techniques
-
This module will give an understanding of the most up-to-date communication techniques used in the design and operation of broadband wireless systems based on OFDM technology such as WiFi, WiMAX and LTE. The module will explore the physical (PHY) layer, medium access control (MAC) and radio resource management functionalities of broadband wireless systems. It will also include an introduction to broadband wireless systems; the principles of OFDM, OFDMA and TDD/FDD multiple access; bit interleaved convolutional and turbo channel coding/decoding for OFDM systems; adaptive coding and modulation; frequency selective fading, channel estimation and equalisation; MIMO techniques; and network architectures.
15 credits - Wireless Packet Data Networks and Protocols
-
The aim of this module is to give an understanding of the functionality of packet switching protocols at different layers of a wireless system and to appreciate how these protocols achieve reliable data delivery in wireless communication systems. The module also includes an introduction to packet switching in wireless networks; radio link protocols, CRC, ARQ and hybrid-ARQ; MAC protocols; packet scheduling and differentiated quality of service; routing, IP protocol, mobile IP, wireless TCP and end-to-end quality of service; radio resource management, network planning and optimisation; network examples - WiFi, HSPA or LTE.
15 credits - Engineering Research and Design Project
-
The aim of this module is to equip students with skills, knowledge and experience needed to carry out research independently and as a team for solving engineering problems set in a range of globally applicable contexts. As members of a team, students will develop and demonstrate a range of skills that will enhance their ability to tackle research projects and add value to their employability. Specifically, students will develop skills in the areas of critical literature review, engineering design, project management, team working, and communication.
15 credits
Optional modules - one from:
- Advanced Computer Systems
-
This module looks at modern computer systems from operating systems down to the underlying computer architectures to provide a coherent view of how such systems work and how their performance can be improved, looking, in particular, at parallelism.
15 credits - Advanced Integrated Electronics
-
This module will advance your understanding of analogue and digital VLSI design. It concentrates on issues such as power consumption, the effect of interconnect, non-CMOS logic, circuit layout, analog amplifiers, data converters, and using Spice.
15 credits - Optical Communication Devices and Systems
-
The course examines the behaviour of the components in a communications system and the way in which their design and individual performance is determined by that of the system requirements.
15 credits - Electronic Communication Technologies
-
This module aims to provide you with a range of skills that are required when designing circuits and systems at high frequencies. Topics covered will include: electromagnetic interference mechanisms, circuit design techniques, filtering, screening, transmission lines, S-parameters, Smith charts, equivalent circuits for passive and active devices, radio frequency (RF) amplifier design, noise performance and nonlinearities of RF circuits and systems.
15 credits - Data Coding Techniques for Communication and Storage
-
Processing techniques to enable transmission and storage of data, in a reliable and secure fashion, are a key element in nearly all modern communication systems. This module deals with data-coding techniques required for reliable and secure data transmission and storage. It covers various aspects of digital communication combining elementary communication theory with practical solutions to problems encountered.
15 credits - System Design
-
This module is concerned with the management of complexity in system design. To learn the basics of structured approach to design of complex systems, you will undertake a design project that requires the application of state of the art design tools that help to achieve appropriate error free design structures.
15 credits
The content of our courses is reviewed annually to make sure it's up-to-date and relevant. Individual modules are occasionally updated or withdrawn. This is in response to discoveries through our world-leading research; funding changes; professional accreditation requirements; student or employer feedback; outcomes of reviews; and variations in staff or student numbers. In the event of any change we'll consult and inform students in good time and take reasonable steps to minimise disruption.
Open days
An open day gives you the best opportunity to hear first-hand from our current students and staff about our courses.
Find out what makes us special at our next online open day on Wednesday 17 April 2024.
You may also be able to pre-book a department visit as part of a campus tour.Open days and campus tours
Duration
1 year full-time
Teaching
We deliver research-led teaching with support for your research project and dissertation.
Assessment
Assessment is by examinations, coursework, and a project dissertation with oral presentation.
Department
Department of Electronic and Electrical Engineering
We've been at the forefront of research and teaching within the field of electrical engineering for over a century, and in electronics since its advent in the mid 20th century. The use of electronics has become mainstream in a very short period of time, as we find innovative solutions to meet our everyday needs and new challenges.
Our MSc postgraduate taught degrees provide you with an opportunity to further your knowledge of electronic and electrical engineering, while potentially specialising in a specific field of the subject, enabling you to pursue a particular direction in either your chosen career or further study.
Whether you’re interested in the latest communication systems, cutting-edge semiconductor research, or developing your understanding of electrical machines and drives for the vehicles of the future, studying with us will help you grow as a student and researcher.
The department offers postgraduate students a choice of four one-year, full-time masters courses, which combine taught study on a wide range of modules and an exciting individual research project. You’ll learn from our academic experts, the majority of whom have strong links with partners in industry.
Our state-of-the-art teaching laboratories allow you to gain exposure to the world-leading research environment of the department whilst undertaking your project, and get hands on with equipment used in industry as preparation for your career. All of our courses are also accredited by the Institution of Engineering and Technology.
Entry requirements
Minimum 2:1 honours degree in electronic and electrical engineering, physics, maths and other branches of engineering involving significant mathematical competence and relevant technical modules.
You should have a strong background in maths modules and in technical modules such as (but not limited to) signals and systems, and digital signal processing.
We will need evidence of relevant work/practical experience or strong performance in a major individual project during your undergraduate degree.
Overall IELTS score of 6.5 with a minimum of 6.0 in each component, or equivalent.
If you have any questions about entry requirements, please contact the department.
Fees and funding
Apply
You can apply now using our Postgraduate Online Application Form. It's a quick and easy process.
Contact
eee-mscrec@sheffield.ac.uk
+44 114 222 5182
Any supervisors and research areas listed are indicative and may change before the start of the course.
Recognition of professional qualifications: from 1 January 2021, in order to have any UK professional qualifications recognised for work in an EU country across a number of regulated and other professions you need to apply to the host country for recognition. Read information from the UK government and the EU Regulated Professions Database.