Electrical and Electronic Engineering with an Industrial Placement Year BEng
2024-25 entryStudy in Sheffield for the first two years of your course where you will cover the theoretical and practical aspects across the range of electrical and electronic engineering. In your third year you have the opportunity to put into practice what you have learnt by working for a year in an engineering company before returning to Sheffield for your final year of study.
Key details
- A Levels AAB
Other entry requirements - UCAS code H633
- 4 years / Full-time
- September start
- Accredited
- Find out the course fee
- Industry placement
Explore this course:
Course description
Learn about the design, fabrication and use of a wide range of electronics, circuits, devices and power systems.
Your study will take in:
- electrical machines and power systems such as wind turbines and the national grid
- electronic devices, circuits and systems such as lasers, microprocessors and computers
- communication devices and systems such as radio frequency (RF) antennas and 5G mobile networks.
You'll explore theoretical and practical aspects across the range of electronic and electrical engineering, and use computer design tools extensively.
We offer a wide choice of optional modules – these cover many aspects of electrical and electronic engineering and communications.
All our first-year students take part in the faculty's Global Engineering Challenge, working with students from other engineering disciplines to solve a real-world problem. All second years get to work on a week-long project devised by one of our industry partners. You'll also get the chance to work with an engineering company through the Sheffield Industrial Project Scheme.
At the end of your second year you can choose an area to specialise in or continue with the more general electrical and electronic engineering, which is our most popular course.
The degree streams that you can choose from are:
- electrical engineering
- electronic engineering
- electronic and communications engineering
- electrical and electronic engineering.
You’ll spend your third year working full time for an engineering company. This is a great opportunity to put what you have learnt into context while gaining additional skills and experience to enhance your career prospects.
In your final year, you'll carry out your own research project, supervised by an academic.
Accredited by the Institution of Engineering and Technology (IET) on behalf of the Engineering Council for the purposes of fully meeting the academic requirement for registration as an Incorporated Engineer and partially meeting the academic requirement for registration as a Chartered Engineer.
Modules
UCAS code: H633
Years: 2022, 2023
Core modules:
- Digital System Engineering
-
This module introduces the basic principles underlying the design of electronic systems. The ideas are discussed mainly in the context of digital design which cannot be undertaken realistically without some level of system thinking and planning. Other areas of system design will be used to illustrate and reinforce the idea that system design ideas apply to many fields beside digital design. The module will also introduce some of the computer based tools used by system designers for simulation and verification.
20 credits - Electrical Circuits and Networks
-
This module introduces the basic principles underlying electric circuits. The idea of a circuit, and the concepts of voltage, current and power are introduced for both alternating and direct sources. The interaction between electrical circuits and magnetic circuits is discussed and the idea of mutual coupling and transformers is introduced. Formal analysis methods such as nodal, loop and superposition are introduced in the context of dc and ac circuits and the complex notation for ac quantities applied to the latter. The calculation of power in a range of contexts is discussed extensively.
20 credits - Electronic Devices and Circuits
-
This module introduces the physical principles that govern the properties and applications of the active and passive circuit components that comprise all electronic and electrical circuits. Issues affecting the practical behaviour of resistors, capacitors and especially diodes and transistors are discussed. The circuit environments in which diodes and transistors are used, and the models describing their internal behaviour and external interactions, are introduced. It is shown how transistors and diodes can be used in both switching circuits and amplifier circuits and the important concept of small signal modelling is introduced in the context of the latter.
20 credits - Mathematics (Electrical and Aerospace)
-
This module aims to reinforce students' previous knowledge and to develop new basic mathematical techniques needed to support the engineering subjects taken at Levels 1 and 2. It also provides a foundation for the Level 2 mathematics courses in the appropriate engineering department. The module is delivered via online lectures, reinforced with weekly interactive problem classes..
20 credits - General Skills
-
This is a general skills module which encompasses a range of professional development activities that will be useful throughout the remainder of your degree and career. These include practical skills in the laboratory, simulation skills for analysing circuits, communication skills and career development.
10 credits
You will learn to use the full range of industry standard laboratory equipment such as oscilloscopes, waveform generators and soldering workstations. A series of engaging exercises, both in the lab and using advanced simulation tools, are designed to build up your proficiency in practical engineering. You will use measurements to determine the mystery components in hidden boxes, practice soldering and fault-finding on printed circuit boards, and combine programming with circuits using microcontrollers to solve real world challenges. Many activities have short written tasks aligned to them, allowing focused practice at technical communications with rapid feedback from staff.
In the personal tutorials programme, you will work through personal development activities in small groups, such as effective CV writing and communication skills. You will receive regular feedback on your personal development through skills audits aligned to the Sheffield Graduate Attributes. Some activities will be individual, such as researching your own employability strategy to get your dream engineering job, while others will be in teams, such as giving peer feedback on presentations and an exciting team-based robotics challenge.
The module culminates in an independent construction project that will require all of your skills together - past projects have included creating audio speaker circuits (handling digital input signals right through to audible sound outputs) and infra-red remote controls.
The combination of the two strands to the module will prepare you to work as a professional engineer throughout your degree programme and beyond. - Introduction to Energy
-
This module introduces the concepts of electricity and energy in the home. It is aimed at a wide audience and answers those questions that many people have about energy, electricity and renewables but don't know who or how to ask. The module will use only basic arithmetic maths - multiplication, division, addition and subtraction. Renewable energy sources such as solar PV panels, small wind turbines and heat pumps will be described. What savings can you really make? Petrol vs diesel cars, how does electric fit into the picture?
10 credits - Programming
-
This unit deals with practical programming. Students will study and practise programming in C andMatlab to provide underpinning skills for their development as engineers.
10 credits - System Design Analysis
-
This module gives you a hands-on appreciation of the design, manufacture and operation of electrical and electronic products. Delivery will consist of lectures and laboratory classes.There will be two types of laboratories: (a) Deconstruction (b) ConstructionIn (a) you will be guided through the deconstruction of defunct commonplace electrical products. You will discover how the products are made; how the various sub-components interact and the materials that have been used.In (b) you will build some simple electrical/electronic systems. This may include the use of simple circuit simulation tools and a take-home kit.The lectures will be used to facilitate the labs and will also include discussions of the issues associated with recycling and sustainability.
10 credits - Global Engineering Challenge Week
-
The Faculty-wide Global Engineering Challenge Week is a compulsory part of the first-year programme. The project has been designed to develop student academic, transferable and employability skills as well as widen their horizons as global citizens. Working in multi-disciplinary groups of 5-6, for a full week, all students in the Faculty choose from a number of projects arranged under a range of themes including Water, Waste Management, Energy and Digital with scenarios set in an overseas location facing economic challenge. Some projects are based on the Engineers Without Borders Engineering for people design challenge*.
*The EWB challenge provides students with the opportunity to learn about design, teamwork and communication through real, inspiring, sustainable and cross-cultural development projects identified by EWB with its community-based partner organisations.
Core modules:
- Electrical Energy and Conversion
-
An outline of the electrical supply infrastructure, including the plurality of electrical energy generation modalities currently in use, is followed by elementary ideas behind protection, safety and tariff structures. The characteristics of electrical machines are discussed together with the circuit strategies that can be used to control of machine performance. Circuits for more general high efficiency power management are also described. Circuits dealing with power will dissipate energy and that energy must be removed if overheating is to be avoided - elements of thermal management are discussed in the context of audio power amplifiers.
30 credits - Analogue and Digital Electronics
-
This module brings together the underlying physical principles of BJT, JFET and MOSFET devices to show how structural decisions in device design affect performance as a circuit element. Basic circuit topologies such as long - tailed pairs, Darlington transistors and current mirrors are described as a precursor to exploring the internal design of a typical op-amp. Common applications of op-amps are discussed. The relationship between device structure and performance in simple CMOS circuits is explored and applied to real digital circuit applications. Digital system design strategies are introduced with examples drawn from everyday embedded digital systems.
20 credits - Communication Electronics
-
This module introduces the basic structure of a communication system and examines the various circuits and signal engineering strategies that are necessary to make a system work. The fundamental building blocks of a communications system are introduced and analysed in terms of the critical design metrics. Following on from the system approach, a range of circuit components are introduced and analysed such as filters and oscillators. This approach will provide you with a range of levels of system and component understanding such that you can apply these to designs.
20 credits - Design Project
-
You will undertake an extended design project that will encompass modelling, design, implementation and test. The list of available projects may vary from year-to-year, but will always encompass a range of topics from different aspects of electronic and electrical engineering.
10 credits - Engineering Software Design
-
This module builds on the C programming learned in year 1 by exploring both the higher level issues of programming, modelling, and skills that an Electronic Engineer should possess. Three mini projects using C and MATLAB and drawn from across the department. The aim is to develop in you the habits of object orientation (e.g. modularity, data hiding, etc.) using C and MATLAB, both commonly used industry standard tools, and writing software for embedded systems.
10 credits - Industrial Project
-
This module combines a lecture series and an industrially inspired group project task under the SHIPS banner, SHIPS standing for SHeffield Industrial Projects Scheme. The group industrial project aims to allow you to develop skills in such areas as engineering problem solving, effective communication (both oral and written) and group project management; all by tackling a complex technical problem with difficult realistic constraints within a restricted timescale.
10 credits - Managing Engineering Projects and Teams
-
This module provides you with an understanding of the significance of projects as an instrument of business success in engineering organisations. You will learn a range of project management tools, techniques and methodologies throughout the project life cycle. You will develop skills in defining, planning, delivering, and controlling engineering projects. You will also learn the roles and responsibilities of people within engineering projects and understand how to manage teams in engineering projects.
10 credits - Mathematics II (Electrical)
-
This module is part of a series of Level Two modules designed for the particular group of engineers shown in brackets in the module title. Each module consolidates previous mathematical knowledge and develops new mathematical techniques relevant to the particular engineering discipline.
10 credits - Engineering - You're Hired
-
The Faculty-wide Engineering - You're Hired Week is a compulsory part of the second year programme, and the week has been designed to develop student academic, transferable and employability skills. Working in multi-disciplinary groups of about six, students will work in interdisciplinary teams on a real world problem over an intensive week-long project. The projects are based on problems provided by industrial partners, and students will come up with ideas to solve them and proposals for a project to develop these ideas further.
Core modules:
- Year In Industry
-
The course enables students to spend, typically, their third year of a BEng or fourth year of an MEng working in a 'course relevant' role in industry. This provides them with wide ranging experiences and opportunities that put their academic studies into context and improve their skills and employability. Students will also benefit from experiencing the culture in industry, making contacts, and the placement will support them in their preparation for subsequent employment.
120 credits
In the fourth year you will be able to continue with the more general Electrical and Electronic Engineering which is our most popular course or choose an area to specialise in from the list of streams below.
- Electrical and Electronic Engineering
- Electrical Engineering
- Electronic Engineering
- Electronic and Communications Engineering
Explore the modules for each stream below.
Electrical and Electronic Engineering core modules:
- Individual Design Project
-
To provide a structured individual design project to enable the student to carry out practical and/or theoretical work which underpins his/her academic studies and allows for the acquisition and demonstration of a wide range of practical skills applied to engineering designs.
40 credits - Feedback Systems Design
-
The module provides an introduction to the modelling, analysis and design of feedback control systems using classical control theory. The focus is linear time-invariant (LTI) systems in the continuous-time domain, although a brief introduction is also provided to digital controllers.
10 credits - Finance and Law for Engineers
-
The module is designed to introduce engineering students to key areas of financial and legal risk that engineers should be aware of in their working environment. The module will draw directly on practical issues of budgeting, raising finance, assessing financial risks and making financial decisions in the context of engineering projects and/or product development. At the same time the module will develop students' understanding of the legal aspects of entering into contracts for the development and delivery of engineering projects and products and an awareness of environmental regulation, liability for negligence, intellectual property rights and the importance of data protection. Through a series of parallel running lectures in the two disciplines, the module will provide a working knowledge of the two areas and how they impinge on engineering practice. There will be a heavy emphasis on group working, report writing and presentation as part of the assessment supplemented by online exercises and an individual portfolio.
10 credits - Power Electronics
-
To introduce and develop an understanding of power electronic devices and circuits; to develop circuit analysis techniques, circuit understanding and design capabilities for use in ac and dc power converters.
10 credits
Electrical and Electronic Engineering optional modules:
- Digital Engineering
-
This module provides an introduction to digital processor organisation, architecture, instruction set architectures and system organisation/design. It also provides elements on the underlying computer arithmetic and approaches to design (including Verilog Hardware Description Language). The module is underpinned by practical examples. The module then considers an important application area, looking at the fundamental concepts, underlying mathematics, design methodologies and techniques.
20 credits - Electromagnetic Fields and Devices
-
This module will introduce students static electric and magnetic fields, Maxwell's equations and the application of these equations to electro- and magento-static field problems. This will be extended to consider low frequency time-varying fields and the magnetic field calculations necessary to analyse rotating electrical machines. There will also be a consideration of the numerical methods used to solve magnetic field problems. These ideas will then underpin the second half of the module that will concentrate on the design of electrical machines, considering rating, windings and magnets.
20 credits - Electronics and Devices
-
This module aims to describe the generic circuit elements, analogue and digital and their associated properties which are typically used within IC circuits. Additionally, this module aims to bring you a level of understanding of VLSI design, such that you can design basic circuits.
20 credits
Having considered integrated electronics at a circuit level, this module will then look at the fundamental properties of semiconductor materials and devices. It will introduce properties of semiconductor materials such as Si, GaAs and GaN. The semiconductor material properties will be used to design a range of devices including solar cell, photodetector, LEDs, Lasers and microwave devices. Heterojunctions and nanostructures (such as quantum wells) will be introduced to improve semiconductor device performance. The module also aims to provide the knowledge to exploit semiconductor properties, material selection and approaches in device designs. - Power Engineering
-
This module will consider the design and performance of large power systems supply network. The module wil concentrate on models and techniques used to analyse the behaviour of such systems and the specification of major equipment used in such systems. The module will then build on this to consider the stability and fault analysis of such systems, identifying basic techniques for protection.
20 credits - Antennas, Radar and Navigation
-
This module is about understanding the fundamentals and common applications of antennas and radar systems. The basic characteristics of some of the commonly used antennas, and antenna systems, will be examined in the context of practical design and application. The radar part of the module will introduce the basic concepts of radar and examine various types of commercial and military radar system in common use. The application of radar and other methods in airborne navigation and landing systems will be discussed. Throughout the module emphasis will be placed on 'first-order' analysis techniques in order to reduce the use of advanced mathematics.
10 credits - Digital Design
-
This module provides an introduction to digital processor organisation, architecture, instruction set architectures and system organisation/design. It also provides elements on the underlying computer arithmetic and approaches to design (including Verilog Hardware Description Language). The module is underpinned by practical examples.
10 credits - Electrical Power Systems
-
To provide an insight into the main issues concerning the design and performance of a large power network, to develop models and analytical techniques used in the calculation of the characteristics and specification of the main items of equipment involved in the generation, transmission and distribution of electrical power.
10 credits - Engineering Electromagnetics
-
The module aims to develop understanding of the physical behaviour of electric and magnetic fields; to teach how to apply these ideas in electronic and electrical engineering and to develop skills in calculating fields in a variety of engineering applications.
10 credits - Integrated Electronics
-
This module aims to describe the generic circuit elements, analogue and digital and their associated properties which are typically used within IC circuits. Additionally, this module aims to bring you a level of understanding of VLSI design, such that you can design basic circuits.
10 credits - Introduction to Digital Signal Processing
-
To introduce fundamental ideas of digital signal processing (DSP), its limitations and its advantages; to give the student a working knowledge of basic DSP operations, as well as a solid theoretical understanding of their behaviour; to make the student aware of the options available when constructing a practical DSP system.
10 credits - Machine Design
-
To develop an understanding of the relationship between dimensions and rating of machines; to introduce the principles of winding designs; to develop techniques for the design of permanent magnet machines; to calculate representative winding reactances.
10 credits - Mathematics III (Electrical)
-
This module consolidates previous mathematical knowledge and develops new mathematical techniques relevant to electrical engineering at levels 3 and 4.
10 credits - Power Engineering Electromagnetics
-
This module will introduce students static electric and magnetic fields, Maxwell's equations and the application of these equations to electro- and magento-static field problems. This will be extended to consider low frequency time-varying fields and the magnetic field calculations necessary to analyse rotating electrical machines. There will also be a consideration of the numerical methods used to solve magnetic field problems.
10 credits - Principles of Communications
-
This course considers the theory and techniques used by a wide range of communication systems, particularly the more recent digital and cryptographic systems. The aim is for students to develop a good grasp of the structure of a modern communication system and to understand the basic issues at each stage in the system.
10 credits - Semiconductor Electronics
-
This module will look at the fundamental properties of semiconductor materials and devices. It will introduce properties of semiconductor materials such as Si, GaAs and GaN. The semiconductor material properties will be used to design a range of devices including solar cell, photodetector, LEDs, Lasers and microwave devices. Heterojunctions and nanostructures (such as quantum wells) will be introduced to improve semiconductor device performance. The module aims to provide the knowledge to exploit semiconductor properties, material selection and approaches in device designs.
10 credits
Electrical Engineering core modules:
- Individual Design Project
-
To provide a structured individual design project to enable the student to carry out practical and/or theoretical work which underpins his/her academic studies and allows for the acquisition and demonstration of a wide range of practical skills applied to engineering designs.
40 credits - Feedback Systems Design
-
The module provides an introduction to the modelling, analysis and design of feedback control systems using classical control theory. The focus is linear time-invariant (LTI) systems in the continuous-time domain, although a brief introduction is also provided to digital controllers.
10 credits - Finance and Law for Engineers
-
The module is designed to introduce engineering students to key areas of financial and legal risk that engineers should be aware of in their working environment. The module will draw directly on practical issues of budgeting, raising finance, assessing financial risks and making financial decisions in the context of engineering projects and/or product development. At the same time the module will develop students' understanding of the legal aspects of entering into contracts for the development and delivery of engineering projects and products and an awareness of environmental regulation, liability for negligence, intellectual property rights and the importance of data protection. Through a series of parallel running lectures in the two disciplines, the module will provide a working knowledge of the two areas and how they impinge on engineering practice. There will be a heavy emphasis on group working, report writing and presentation as part of the assessment supplemented by online exercises and an individual portfolio.
10 credits - Power Electronics
-
To introduce and develop an understanding of power electronic devices and circuits; to develop circuit analysis techniques, circuit understanding and design capabilities for use in ac and dc power converters.
10 credits - Power Engineering
-
This module will consider the design and performance of large power systems supply network. The module wil concentrate on models and techniques used to analyse the behaviour of such systems and the specification of major equipment used in such systems. The module will then build on this to consider the stability and fault analysis of such systems, identifying basic techniques for protection.
20 credits - Electromagnetic Fields and Devices
-
This module will introduce students static electric and magnetic fields, Maxwell's equations and the application of these equations to electro- and magento-static field problems. This will be extended to consider low frequency time-varying fields and the magnetic field calculations necessary to analyse rotating electrical machines. There will also be a consideration of the numerical methods used to solve magnetic field problems. These ideas will then underpin the second half of the module that will concentrate on the design of electrical machines, considering rating, windings and magnets.
20 credits
Electrical Engineering optional modules:
- Introduction to Digital Signal Processing
-
To introduce fundamental ideas of digital signal processing (DSP), its limitations and its advantages; to give the student a working knowledge of basic DSP operations, as well as a solid theoretical understanding of their behaviour; to make the student aware of the options available when constructing a practical DSP system.
10 credits - Principles of Communications
-
This course considers the theory and techniques used by a wide range of communication systems, particularly the more recent digital and cryptographic systems. The aim is for students to develop a good grasp of the structure of a modern communication system and to understand the basic issues at each stage in the system.
10 credits - Antennas, Radar and Navigation
-
This module is about understanding the fundamentals and common applications of antennas and radar systems. The basic characteristics of some of the commonly used antennas, and antenna systems, will be examined in the context of practical design and application. The radar part of the module will introduce the basic concepts of radar and examine various types of commercial and military radar system in common use. The application of radar and other methods in airborne navigation and landing systems will be discussed. Throughout the module emphasis will be placed on 'first-order' analysis techniques in order to reduce the use of advanced mathematics.
10 credits - Integrated Electronics
-
This module aims to describe the generic circuit elements, analogue and digital and their associated properties which are typically used within IC circuits. Additionally, this module aims to bring you a level of understanding of VLSI design, such that you can design basic circuits.
10 credits - Digital Design
-
This module provides an introduction to digital processor organisation, architecture, instruction set architectures and system organisation/design. It also provides elements on the underlying computer arithmetic and approaches to design (including Verilog Hardware Description Language). The module is underpinned by practical examples.
10 credits - Semiconductor Electronics
-
This module will look at the fundamental properties of semiconductor materials and devices. It will introduce properties of semiconductor materials such as Si, GaAs and GaN. The semiconductor material properties will be used to design a range of devices including solar cell, photodetector, LEDs, Lasers and microwave devices. Heterojunctions and nanostructures (such as quantum wells) will be introduced to improve semiconductor device performance. The module aims to provide the knowledge to exploit semiconductor properties, material selection and approaches in device designs.
10 credits - Mathematics III (Electrical)
-
This module consolidates previous mathematical knowledge and develops new mathematical techniques relevant to electrical engineering at levels 3 and 4.
10 credits
Electronic Engineering stream core modules:
- Individual Design Project
-
To provide a structured individual design project to enable the student to carry out practical and/or theoretical work which underpins his/her academic studies and allows for the acquisition and demonstration of a wide range of practical skills applied to engineering designs.
40 credits - Feedback Systems Design
-
The module provides an introduction to the modelling, analysis and design of feedback control systems using classical control theory. The focus is linear time-invariant (LTI) systems in the continuous-time domain, although a brief introduction is also provided to digital controllers.
10 credits - Finance and Law for Engineers
-
The module is designed to introduce engineering students to key areas of financial and legal risk that engineers should be aware of in their working environment. The module will draw directly on practical issues of budgeting, raising finance, assessing financial risks and making financial decisions in the context of engineering projects and/or product development. At the same time the module will develop students' understanding of the legal aspects of entering into contracts for the development and delivery of engineering projects and products and an awareness of environmental regulation, liability for negligence, intellectual property rights and the importance of data protection. Through a series of parallel running lectures in the two disciplines, the module will provide a working knowledge of the two areas and how they impinge on engineering practice. There will be a heavy emphasis on group working, report writing and presentation as part of the assessment supplemented by online exercises and an individual portfolio.
10 credits - Power Electronics
-
To introduce and develop an understanding of power electronic devices and circuits; to develop circuit analysis techniques, circuit understanding and design capabilities for use in ac and dc power converters.
10 credits - Digital Engineering
-
This module provides an introduction to digital processor organisation, architecture, instruction set architectures and system organisation/design. It also provides elements on the underlying computer arithmetic and approaches to design (including Verilog Hardware Description Language). The module is underpinned by practical examples. The module then considers an important application area, looking at the fundamental concepts, underlying mathematics, design methodologies and techniques.
20 credits - Electronics and Devices
-
This module aims to describe the generic circuit elements, analogue and digital and their associated properties which are typically used within IC circuits. Additionally, this module aims to bring you a level of understanding of VLSI design, such that you can design basic circuits.
20 credits
Having considered integrated electronics at a circuit level, this module will then look at the fundamental properties of semiconductor materials and devices. It will introduce properties of semiconductor materials such as Si, GaAs and GaN. The semiconductor material properties will be used to design a range of devices including solar cell, photodetector, LEDs, Lasers and microwave devices. Heterojunctions and nanostructures (such as quantum wells) will be introduced to improve semiconductor device performance. The module also aims to provide the knowledge to exploit semiconductor properties, material selection and approaches in device designs.
Electronic Engineering stream optional modules:
- Machine Design
-
To develop an understanding of the relationship between dimensions and rating of machines; to introduce the principles of winding designs; to develop techniques for the design of permanent magnet machines; to calculate representative winding reactances.
10 credits - Principles of Communications
-
This course considers the theory and techniques used by a wide range of communication systems, particularly the more recent digital and cryptographic systems. The aim is for students to develop a good grasp of the structure of a modern communication system and to understand the basic issues at each stage in the system.
10 credits - Antennas, Radar and Navigation
-
This module is about understanding the fundamentals and common applications of antennas and radar systems. The basic characteristics of some of the commonly used antennas, and antenna systems, will be examined in the context of practical design and application. The radar part of the module will introduce the basic concepts of radar and examine various types of commercial and military radar system in common use. The application of radar and other methods in airborne navigation and landing systems will be discussed. Throughout the module emphasis will be placed on 'first-order' analysis techniques in order to reduce the use of advanced mathematics.
10 credits - Electrical Power Systems
-
To provide an insight into the main issues concerning the design and performance of a large power network, to develop models and analytical techniques used in the calculation of the characteristics and specification of the main items of equipment involved in the generation, transmission and distribution of electrical power.
10 credits - Engineering Electromagnetics
-
The module aims to develop understanding of the physical behaviour of electric and magnetic fields; to teach how to apply these ideas in electronic and electrical engineering and to develop skills in calculating fields in a variety of engineering applications.
10 credits - Power Engineering Electromagnetics
-
This module will introduce students static electric and magnetic fields, Maxwell's equations and the application of these equations to electro- and magento-static field problems. This will be extended to consider low frequency time-varying fields and the magnetic field calculations necessary to analyse rotating electrical machines. There will also be a consideration of the numerical methods used to solve magnetic field problems.
10 credits - Mathematics III (Electrical)
-
This module consolidates previous mathematical knowledge and develops new mathematical techniques relevant to electrical engineering at levels 3 and 4.
10 credits
Electronic and Communications Engineering stream core modules:
- Individual Design Project
-
To provide a structured individual design project to enable the student to carry out practical and/or theoretical work which underpins his/her academic studies and allows for the acquisition and demonstration of a wide range of practical skills applied to engineering designs.
40 credits - Feedback Systems Design
-
The module provides an introduction to the modelling, analysis and design of feedback control systems using classical control theory. The focus is linear time-invariant (LTI) systems in the continuous-time domain, although a brief introduction is also provided to digital controllers.
10 credits - Finance and Law for Engineers
-
The module is designed to introduce engineering students to key areas of financial and legal risk that engineers should be aware of in their working environment. The module will draw directly on practical issues of budgeting, raising finance, assessing financial risks and making financial decisions in the context of engineering projects and/or product development. At the same time the module will develop students' understanding of the legal aspects of entering into contracts for the development and delivery of engineering projects and products and an awareness of environmental regulation, liability for negligence, intellectual property rights and the importance of data protection. Through a series of parallel running lectures in the two disciplines, the module will provide a working knowledge of the two areas and how they impinge on engineering practice. There will be a heavy emphasis on group working, report writing and presentation as part of the assessment supplemented by online exercises and an individual portfolio.
10 credits - Engineering Electromagnetics
-
The module aims to develop understanding of the physical behaviour of electric and magnetic fields; to teach how to apply these ideas in electronic and electrical engineering and to develop skills in calculating fields in a variety of engineering applications.
10 credits - Digital Engineering
-
This module provides an introduction to digital processor organisation, architecture, instruction set architectures and system organisation/design. It also provides elements on the underlying computer arithmetic and approaches to design (including Verilog Hardware Description Language). The module is underpinned by practical examples. The module then considers an important application area, looking at the fundamental concepts, underlying mathematics, design methodologies and techniques.
20 credits - Communication Engineering
-
This module is about the fundamental techniques used by a wide range of communications systems and common applications of antennas and radar systems. A major aim is to create a theoretical background that applies to all communication systems and is not affected by a particular technology. The characteristics of the common antenna systems will be examined (design and application). The module introduces the basic concepts of radar and examines types of radar system in common use. Airborne navigation and landing systems will be discussed. Emphasis is placed on 'first-order' analysis techniques in order to reduce the use of advanced mathematics.
20 credits
Electronic and Communications Engineering stream optional modules:
- Machine Design
-
To develop an understanding of the relationship between dimensions and rating of machines; to introduce the principles of winding designs; to develop techniques for the design of permanent magnet machines; to calculate representative winding reactances.
10 credits - Power Electronics
-
To introduce and develop an understanding of power electronic devices and circuits; to develop circuit analysis techniques, circuit understanding and design capabilities for use in ac and dc power converters.
10 credits - Integrated Electronics
-
This module aims to describe the generic circuit elements, analogue and digital and their associated properties which are typically used within IC circuits. Additionally, this module aims to bring you a level of understanding of VLSI design, such that you can design basic circuits.
10 credits - Semiconductor Electronics
-
This module will look at the fundamental properties of semiconductor materials and devices. It will introduce properties of semiconductor materials such as Si, GaAs and GaN. The semiconductor material properties will be used to design a range of devices including solar cell, photodetector, LEDs, Lasers and microwave devices. Heterojunctions and nanostructures (such as quantum wells) will be introduced to improve semiconductor device performance. The module aims to provide the knowledge to exploit semiconductor properties, material selection and approaches in device designs.
10 credits - Electrical Power Systems
-
To provide an insight into the main issues concerning the design and performance of a large power network, to develop models and analytical techniques used in the calculation of the characteristics and specification of the main items of equipment involved in the generation, transmission and distribution of electrical power.
10 credits - Mathematics III (Electrical)
-
This module consolidates previous mathematical knowledge and develops new mathematical techniques relevant to electrical engineering at levels 3 and 4.
10 credits
The content of our courses is reviewed annually to make sure it's up-to-date and relevant. Individual modules are occasionally updated or withdrawn. This is in response to discoveries through our world-leading research; funding changes; professional accreditation requirements; student or employer feedback; outcomes of reviews; and variations in staff or student numbers. In the event of any change we'll consult and inform students in good time and take reasonable steps to minimise disruption.
Learning and assessment
Learning
Learning will be delivered through a combination of lectures, practical labs and tutorials as well as independent study that is supported by problem classes.
In your first and second year all your labs will be held in the Diamond where you will use industry grade equipment and have lab sessions in the dedicated teaching clean room.
You will spend your third year working full-time for an engineering company. This will put your study into context and enhance your career prospects.
In the final year, you will carry out your own research project, supervised by an academic.
Our teaching is informed by the research that our department is involved with. This results in learning by a combination of theory and hands on practical lab sessions in our state of the art facilities with courses that are accredited by the Institute of Engineering and Technology (IET).
Assessment
You will be assessed using a mixture of exams/tests, coursework and practical sessions.
Programme specification
This tells you the aims and learning outcomes of this course and how these will be achieved and assessed.
Entry requirements
With Access Sheffield, you could qualify for additional consideration or an alternative offer - find out if you're eligible.
The A Level entry requirements for this course are:
AAB
including Maths and a science
- A Levels + a fourth Level 3 qualification
- ABB, including Maths and a science + B in a relevant EPQ; ABB, including Maths and a science + B in AS or A Level Further Maths
- International Baccalaureate
- 34, with 6, 5 in Higher Level Maths and a science
- BTEC Extended Diploma
- DDD in Engineering + B in A Level Maths
- BTEC Diploma
- DD in Engineering + A in A Level Maths
- T Level
- Distinction in a relevant T Level, including grade A in the core component + B in A Level Maths
- Scottish Highers + 2 Advanced Highers
- AABBB + AB in Maths and a science
- Welsh Baccalaureate + 2 A Levels
- B + AA in Maths and a science
- Access to HE Diploma
- Award of Access to HE Diploma in a relevant subject, with 45 credits at Level 3, including 36 at Distinction (to include Maths and Physics units), and 9 at Merit + Grade B in A Level Maths (or equivalent)
-
Relevant T Level subjects include: Maintenance, Installation & Repair for Engineering & Manufacturing; Building Services Engineering for Construction; or Design & Development for Engineering & Manufacturing
The A Level entry requirements for this course are:
ABB
including Maths and either Physics, Chemistry or Electronics
- A Levels + a fourth Level 3 qualification
- ABB, including Maths and either Physics, Chemistry or Electronics + B in a relevant EPQ; ABB, including Maths and either Physics, Chemistry or Electronics + B in AS or A Level Further Maths
- International Baccalaureate
- 33, with 5 in Higher Level Maths and a science
- BTEC Extended Diploma
- DDM in Engineering + B in A Level Maths
- BTEC Diploma
- DD in Engineering + B in A Level Maths
- T Level
- Distinction in a relevant T Level, including grade A in the core component + B in A Level Maths
- Scottish Highers + 2 Advanced Highers
- ABBBB + AB in Maths and a science
- Welsh Baccalaureate + 2 A Levels
- B + AB in Maths and a science
- Access to HE Diploma
- Award of Access to HE Diploma in a relevant subject, with 45 credits at Level 3, including 30 at Distinction (to include Maths and Physics units), and 15 at Merit + Grade B in A Level Maths (or equivalent)
-
Relevant T Level subjects include: Maintenance, Installation & Repair for Engineering & Manufacturing; Building Services Engineering for Construction; or Design & Development for Engineering & Manufacturing
You must demonstrate that your English is good enough for you to successfully complete your course. For this course we require: GCSE English Language at grade 4/C; IELTS grade of 6.5 with a minimum of 6.0 in each component; or an alternative acceptable English language qualification
Equivalent English language qualifications
Visa and immigration requirements
Other qualifications | UK and EU/international
If you have any questions about entry requirements, please contact the department.
Graduate careers
Department of Electronic and Electrical Engineering
Typical graduate job titles include cybersecurity consultant, design engineer, energy engineering consultant, system engineer, electrical engineer, technology analyst, nuclear controls engineer, software engineer and electronics field engineer.
Employers of graduates include ARM, ARUP, BAE Systems, Barclays, Deloitte, Jaguar, Nissan, National Grid, National Instruments, Renault, Rolls Royce, Shell, Siemens, Unilever and Volvo.
Department of Electronic and Electrical Engineering
We have been at the forefront of research and teaching within the field of electronic and electrical engineering for over a century. In that time the use of electronics has become mainstream requiring challenges to be overcome to provide solutions for everyday needs.
Our students learn from academic experts who have strong links with partners in industry. Our state-of-the-art laboratories allow you to get hands on with equipment used in industry as preparation for your career.
Our wide range of MEng and BEng undergraduate degree programmes provide you with a robust understanding of the principles of electronic and electrical engineering. We offer a common start to all our degrees which offers you the flexibility to change courses at the end of your first year if you wish to focus on certain areas of interest.
All of first year students take part in the faculty's Global Engineering Challenge, working with students from other engineering disciplines to solve a real-world problem. In your third year, you will work on your own research project supervised by an academic.
All our courses are accredited by the Institution of Engineering and Technology. A four-year MEng meets all the academic standards for Chartered Engineer (CEng) status. If you take our three-year BEng, you'll need to complete some further learning to satisfy the requirements.
Why choose Sheffield?
The University of Sheffield
Number one in the Russell Group
National Student Survey 2023 (based on aggregate responses)
92 per cent of our research is rated as world-leading or internationally excellent
Research Excellence Framework 2021
Top 50 in the most international universities rankings
Times Higher Education World University Rankings 2023
Number one Students' Union in the UK
Whatuni Student Choice Awards 2023, 2022, 2020, 2019, 2018, 2017
Number one for teaching quality, Students' Union and clubs/societies
StudentCrowd 2023 University Awards
A top 20 university targeted by employers
The Graduate Market in 2023, High Fliers report
Department of Electronic and Electrical Engineering
QS World University Rankings 2021
Fees and funding
Fees
Additional costs
The annual fee for your course includes a number of items in addition to your tuition. If an item or activity is classed as a compulsory element for your course, it will normally be included in your tuition fee. There are also other costs which you may need to consider.
Funding your study
Depending on your circumstances, you may qualify for a bursary, scholarship or loan to help fund your study and enhance your learning experience.
Use our Student Funding Calculator to work out what you’re eligible for.
Visit
University open days
We host five open days each year, usually in June, July, September, October and November. You can talk to staff and students, tour the campus and see inside the accommodation.
Subject tasters
If you’re considering your post-16 options, our interactive subject tasters are for you. There are a wide range of subjects to choose from and you can attend sessions online or on campus.
Offer holder days
If you've received an offer to study with us, we'll invite you to one of our offer holder days, which take place between February and April. These open days have a strong department focus and give you the chance to really explore student life here, even if you've visited us before.
Campus tours
Our weekly guided tours show you what Sheffield has to offer - both on campus and beyond. You can extend your visit with tours of our city, accommodation or sport facilities.
Apply
Contact us
- Telephone
- +44 114 222 5382
- eee-rec@sheffield.ac.uk
The awarding body for this course is the University of Sheffield.
Recognition of professional qualifications: from 1 January 2021, in order to have any UK professional qualifications recognised for work in an EU country across a number of regulated and other professions you need to apply to the host country for recognition. Read information from the UK government and the EU Regulated Professions Database.
Any supervisors and research areas listed are indicative and may change before the start of the course.